Built Beneath.Protected for Life.
Termipore is an elastomeric pipe network laid under the floor during construction. Termiticide is injected through wall-mounted junction boxes to form a continuous barrier in the soil, and topped up for decades without drilling a single tile.
Rethinking termiteprotection.
Termite protection should be considered as part of the building system from the very beginning — not treated as an afterthought. TermiPore's engineered reticulation systems are installed during construction, creating a permanent underground protection network that safeguards every structure for its entire lifetime.
adsd1
adsd
adsd1
adsd
adsd1
adsd
One system.
Three professionals.
Custom-engineered for architects, builders, and pest control operators to ensure seamless integration.
Design-integrated protection.
TermiPore integrates seamlessly into your building plans at the design stage. Specify the system during schematic design — it lays under the slab and disappears into the structure.
- Design-stage specification
- No post-construction disruption
- BIM compatible layout
Installation-ready system.
Reliable access and ongoing protection.
When to InstallTermiPore Reticulation System?
Protection you don't have to see. TermiPore secures your structure at any stage: foundation, tiling, or post-construction.
Secure at Foundation
Install at plinth/ground level
As can be seen from these pictures, TermiPore Pipes can be installed at foundation level, or even at ground or plinth level. Termites, also known as 'silent destroyers', often make their way under the ground and inflict damage to the foundation and weaken the structure.
It is a myth that only wooden structures are at risk from termites. Termites also make their way through plaster, metal and other materials. They can make tunnels and bore their way through most types of structures. By the time, the damage is evident on the surface, it is too late and also too difficult to treat and control effectively.
Thousands of termites live in a colony, and even after a loss of a large percentage of colony members or even after the loss of the queen bee, those left behind re-organize and can once again multiply and flourish their colony in no time. This means, recurrence after treatment is easily possible. Thereby a need for termite treatment at intermittent intervals is a must. Best way to solve this is to lay an Anti-termite Reticulation System at the foundation level, or at plinth/ground level. Having this installation in place will enable you to effectively treat the ground below with termiticide at periodic intervals. This is the best way to prevent termite and never reach a stage of damage control!
Strengthen During Tiling
Install before laying floor tiles
When Anti-termite Reticulation System is not laid at foundation or ground level, you may not have a barrier to prevent termites. Nothing to worry, you can still save yourself from loss due to termites. You can install TermiPore Reticulation Pipes before laying the tiles.
Once termites make their way up from beneath the ground, they enter inside and damage your interiors by feeding on the furniture and other material inside. Stop them from entering inside. Create a barrier below your floor-tiles and termites will not be able to make their way up and inside your property, thus protecting your precious interiors.
Defend after Construction
Install around the periphery
You have purchased the property after construction and now there is no scope to install TermiPore at foundation or plinth/ground level or even under the tiles, because the construction is already completed.
Does that mean you will now be vulnerable to termite attacks? Not at all! There still is a way out. You can still protect your premises and defend it from termite attack even after construction. You can create a safe barrier by installing TermiPore all around the periphery of the constructed property and also around the inside or outside border of the fence of your property.
Just dig a narrow trench around the periphery, install TermiPore Reticulation Pipes, and fill the trench back! Voila, you have a solid barrier to prevent termites from entering your premises. Termites can travel for almost 70 meters; they can make way underground from neighboring areas/properties to your property and then wreak havoc in your premises. Why wait till they make way to your property and inflict irreparable damage to your premises. Defend your property, lay TermiPore around the periphery and safeguard yourself for decades!
"Regardless of when you install TermiPore Reticulation Pipes, the principles and method of installation remain the same."
From design to installationto ongoing protection.
Choose the perfect TermiPore tube specification engineered for your specific building and layout requirements.
By product code
| Parameter | TP095145 · 14 mm | TP125175 · 17 mm | TP125195 · 19 mm |
|---|---|---|---|
| Inside × outside diameter | 9.5 × 14.5 mm | 12.5 × 17.5 mm | 12.5 × 19.5 mm |
| Marking line | Orange | Green | Red |
| Suitable for | Limited space between slab and tile | All areas, including ground level | High load bearing |
| Micro-hole size | 0.2–1.0 mm | 0.2–1.0 mm | 0.2–1.0 mm |
| Hole density, per metre | 40–70 | 50–80 | 60–100 |
| Designed flow per m/hr @ 0.5 kg/cm² | 14–24 L | 16–30 L | 16–30 L |
| Minimum bending radius | 0.3 m / 1 ft | 0.3 m / 1 ft | 0.4 m / 1.2 ft |
| Fitting size | 12 mm | 16 mm | 16 mm |
| Roll length | 125 m | 125 m | 125 m |
Customised sizes are manufactured as per project requirement. Everything that you need to install the system available under one roof. High Quality Accessories Ecosystem
Protection in practice.
A comprehensive range of high-performance reticulation systems and components designed for lifelong termite prevention.
Our global presence
Protecting structures across global markets by adapting to local codes and regional termite pressures.
Why TermiPoreAnd not a cheaper pipe?
The reticulation pipe is buried under your floor for the life of the building. If it collapses, blocks or cracks, there is no way to replace it without breaking the floor — so the pipe itself is the one place not to economise.
TermiPore — made for reticulation
- ✓Uniform micro-holes all around the pipe, 150+ per metre
- ✓Pressure-operated holes — more open as pressure rises
- ✓Honeycomb structure retains a little termiticide as first line of defence
- ✓Thick wall (2.0–3.5 mm) — does not squeeze or kink under load
- ✓High weight-bearing capacity under sand, PCC and tile
- ✓ESCR & accelerated weathering tested, RoHS compliant, ISO 9001 maker
- ✓QR code, printed website every metre and QC reading on every roll
Drip irrigation / PVC / unbranded pipe
- ✕One hole on one side every foot — chemical only reaches that spot
- ✕Irregular hole size and spacing; jetting instead of even seepage
- ✕Thin wall (often under 1.5 mm) — bends, kinks and squeezes shut
- ✕Made for agriculture and open fields, not for burial under a building
- ✕No load-bearing data, no ageing test, no traceability
- ✕Cannot be inspected or replaced once the floor is laid
Simple test used by the manufacturer: you would not use an agricultural PVC pipe for a building's plumbing — so why use an irrigation pipe for its termite protection?
Latest from News & Insights
Stay updated with our latest technical insights, press releases, case studies, and field performance analyses.
Protection begins with the plan.
TermiPore is specified at the design stage. Talk to our engineers about integrating the system into your next building project.